(This post contains affiliate links.)
DIY MAIL ORGANIZER
This project was incredibly easy and only took about 30 minutes to complete two.
3 – 10 1/4 inch boards
2 – 7 1/2 inch boards
1 – 9 inch board
First off I want to say that I didn’t hunt down a free pallet because I just didn’t have the time. However, this project is perfect for a pallet project. If you don’t have one on hand or can’t find one then the next best solution is 2 picket fence boards. They are extremely inexpensive. I purchased both of mine for $2.50ish total. I made two mail organizers out of that. So $1.25 an organizer, not to shabby.
Because I used a picket board I had to rip them down into 3 1/2 inch boards using the table saw. This isn’t included in the cut list above. If you have a pallet the boards will already come in the standard 1 x 4 boards. If you don’t want to make this extra cut you could always purchase 1 x 4 boards. However, this will up the price of the organizers by several dollars. The reason I went with the picket board was to keep the cost wise, which was nearly free (and rustic feel) of the pallet wood.
Once you have the boards cut from the cut list above you can begin to assemble the diy mail organizer.
Attach 2 of the 10 1/4 inch pieces (the backs) to the 2 sides (the 7 1/2 inch pieces).
Attach the 9 inch board to the bottom, nailing in from the sides.
The final step is to attach the other 10 1/4 inch board to the front.
That is all there is to creating these diy mail organizers. Just a few supplies and about 30 minutes to completion
Estimated Cost: Free – Less than $5
Skill Level: Beginner
Again, I am joining up with some other awesome bloggers for this pallet challenge. If you want even more great projects built out of only pallets (or the picket fence boards) check out these linked up below.
Original article and pictures take http://thisgirlslifeblog.com/2016/03/diy-mail-organizer.html site