I am so pleased with how this project turned out! I have been on the fence about what to do to the front of my Woodtex shed. Seriously, a shed this cute deserves something as cute to dress it up, right?? I wanted to add some flowers and add a bit of function at the same time, and this is what I came up with! Check out my DIY Planter Box Bench!
How cute is that?? I love that I have a space now to sit and watch the kids play on the driveway as well. We also keep all of their rollerblades and toys in the shed, and this gives them the perfect spot to sit and put them on… Win win!
The best part about this bench is that the majority of it is made from cedar fence pickets! This keeps the cost of it really low, and it will hold up well outdoors.
As always, I will help you guys through the build with my photos and tips below. I also had our good friend Jay of Jay’s Custom Creations create some printable plans of my design to share with you guys! He’s the BOMB. You should check out his site! He has lots of fun plans himself!
You can click HERE or the button below to download and/or print our free plans!
Let’s get started! I found all of my wood and materials for this project at the Home Depot. Keep in mind that most fence pickets are 5/8″ thickness. My Home Depot carries one picket that is 3/4″ thick. This is the one that I chose to go with because I like working with this thickness when using my Kreg Jig. If you can only find 5/8″, it will work, but you will need to adjust your Kreg Jig for that thickness. You can also go with cedar boards, but this does drive the cost up, which I am never a fan of .
I started by making all of my cuts. I used my Ridgid compound miter saw for this one. This is my favorite, and most used tool in my garage.
Because these are fence pickets, many of my ends were dog eared. This is fine, I just made sure to keep those ends at the bottom when I lined it all up. I knew that my trim would cover it later, and it helps eliminate wasted wood. You can see here on this one that I have already added my 3/4″ pocket holes using my always awesome Kreg Jig!
Many of you ask which Kreg Jig Ash and I use. We are both currently using the newest K5 model. Before that we were using the K4, and built most of the furniture in our homes with it. They are both amazing models, but the K5 has a few upgrades on it making it even more user friendly. If you just read this paragraph and have no clue what the heck a Kreg Jig is, no worries! Ash and I have a quick video you can check out HERE explaining what it is and the basics of what it does!
Alright… You can see here how I lined up the pickets in the jig to make my pocket holes. I used my Ryobi 18V drill to make all of the pocket holes.
You can see I am making 3/4″ pocket holes, because that is the thickness of the wood I am attaching this piece to.
Each planter box side will have 3 pickets. Here they are with all of their pocket holes before I attached them.
Next, I ran a line of glue down each edge, and attached the pickets using 1 1/4″ pocket hole screws.
The corners of my planter boxes are 2×3 cedar boards. I found these at HD in the fencing section. I used a longer screw on this part to attach my sides to the corners. First, I ran a line of wood glue down the edge.
I started by attaching one side without a corner piece to a side with a corner piece. I used 1 1/4″ screws and glue on this part as well.
To attach my final side, I set the whole box upright. I lined up the final side and attached it in the same method. I did have to reach into the box a bit to get to some of the pocket holes. This may be because I am only 5’2″ and the box is over half my height The ones I couldn’t reach, I flipped the box over to finish.
Bada Bing Bada Boom….
This part is super easy thanks to my ever so awesome Ryobi Airstrike Brad Nailer. This thing is awesome, and cordless making it so easy to use! It uses the same battery as my drill which is super convenient. I just added a line of wood glue to each trim piece and attached it using 1 1/4″ brad nails from the inside of the box. I recommend you measure this part before you cut. Given that these are fence pickets we are using here, the width of each can vary just a tiny bit. I like to measure each space before I cut the trim to fit it.
Once I had all sides trimmed, I added my mitered top. This is very simple to do! This is simple 45 degree cuts and a perfect way to try out mitered corners if you haven’t done many. I used a line of glue down each side and attached the trim using my nail gun.
Finally the bench!
I made my pocket holes for the bench the same way I did on the boxes.
This is my middle support piece. You can see where I have added pocket holes to it before attaching it to the bottom of the seat.
The final step is trimming the front and back. You attach these pieces using pocket hole screws through the holes you made on the bench… Easy peasy!
My last step was filling it up with flowers after I put it in front of the shed! Yesterday, we took the whole gang to Home Depot to pick out flowers for it. We even had one of Ashley’s kids with us How many kids does it take to find flowers? A whole lot apparently! And yes, my little one has on one lime green sock which I have no explanation for.
I got the flowers home just in time to fill the pots before we got some rain! Here it is sitting pretty in front of my shed…
Oooooh I love it! Almost as much as I love my shed! My shed is one of my favorite additions to my house yet. It opened up my garage space giving me room to work. The kids call it our ‘little house’ You can see my Woodtex Shed HERE, and read more about this truly amazing company. They are some of the best people around.
Thanks so much for stopping by guys! I would LOVE for you to share and PIN this project with all your friends!
Let me know if you have any questions at all!
Original article and pictures take http://www.shanty-2-chic.com/2014/05/diy-planter-box-bench.html site