четверг, 23 февраля 2017 г.

Working the Angles

Working the Angles
Working the Angles
TedsWoodworking Plans and Projects

tools for working the angles
Photo by Mark Weiss

How is it that finish carpenters do trim jobs daily without suffering angle-induced embolisms? Easy—because they rely on miter guides, not their eyeballs, to tell them where to cut. Likewise, framing carpenters use squares to determine the angles for rafters, rakes, and stair stringers; and furniture makers consult their protractors before laying out dovetails. The right angle-finding tool is your protection against loose joinery and expletive-filled outbursts, whether you're doing something big like building a garden shed, or simply tackling around-the-house maintenance tasks like measuring for a storm window.

So before you make another unsightly cutting mistake, put down that caulk tube and pick up one of the tools. The old adage—"Measure twice"—still applies. But you also need to know the angles.

The aluminum Pivot Square has a locking, adjustable leg that firmly holds any angle from 0 to 90 degrees, so you can make repeated, consistent mark or guide your circular saw through marks or guide your circular saw through angled crosscuts. Spirit vials help you check for level, as when establishing the angle to cut siding where it meets a roofline. About $84, C.H. Hanson

Three-Sided Squares

three-sided  speed squares
Photo by Mark Weiss

Simple, durable, and full of roof-layout info, the Speed square is a carpenter's classic. Use it to find angles, mark cutlines, and as a crosscut guide to keep your saw straight. Stick with the aluminum alloy version, not plastic: It's more rugged, and the stamped numbers are easier to read. About $10, Swanson Tool Co.

Square Shooter

level for wide pieces of lumber
Photo by Mark Weiss

This layout weapon for wide pieces of lumber has a sliding knob along its semicircular arc. Lock the triangle at the desired degree, then press it and a fixed knob on the handle against the edge of the work. The 12-inch blade can't wobble or pivot as it guides your pencil or your saw.


t-bevel used to mark angles
Photo by Mark Weiss

Lock the T-bevel's sliding blade against any angle, then use the tool to copy that angle onto your work

or to set the angle of a saw blade. This T-bevel's blade locks in place with a recessed bronze latch (as opposed

to the usual wing nut) so either side can lie flush as you're marking your layout.

T-Bevel Setter

t-bevel-setter used to read the angle to half a degree
Photo by Mark Weiss

T-bevels, which have no markings, are great for matching and transferring angles but can't tell you exactly what those angles are. To find out, align the bar on this guide with the T-bevel's blade and read the angle to half a degree. Or set a desired angle and align the bevel's blade with it.

cast-iron protractor head with chromed-steel rule
Photo by Mark Weiss

Starrett's cast-iron protractor head with chromed-steel rule, on the market since 1908, is a classic machinist's tool for anyone who values precise layout marks. The rotating 180-degree head locks the rule at a desired angle or tells you the exact angle of an existing bevel.

Digital Protractor
Photo by Mark Weiss

combination protractor good for cutting crown molding
Photo by Mark Weiss

miter guide to set miter angle
Photo by Mark Weiss

Adjustable T-Square

Adjustable T-Square for improving cutting of drywall, OSB and plywood
Photo by Mark Weiss

Improving on the old 4-foot squares that could only mark 90-degree cuts in drywall, OSB, plywood, and other sheet goods, this adjustable square has markings for 30, 45, and 90 degrees. Or you can set it to any angle between 0 and 180 degrees. Folds for easy transport.

About $40, Johnson Level

Original article and pictures take http://www.thisoldhouse.com/toh/photos/0,,20174934,00.html site

Комментариев нет:

Отправить комментарий